baby brezza BRZ00139 Safe Smart Bottle Warmer Instructions

Safe + Smart Bottle Warmer Instructions Manualbabybrezza® app

IMPORTANT SAFEGUARDS

1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles.
3. To protect against electric shock and injury to persons do not immerse cord, plug, water tank or appliance in water or other liquid.
4. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children being supervised are not to play with the appliance.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before inserting or removing parts, and before cleaning the appliance.
6. Do not operate this appliance with a damaged cord or plug. If the appliance malfunctions or has been damaged in any manner, return appliance to the nearest authorized service facility for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock or injury
8. Use on level surface and be sure there is no debris under the unit and the rubber pads are touching the surface.
9. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments
10. Do not let cord hang over edge of table or counter, or touch hot surfaces.11. Extreme caution must be used when moving an appliance containing hot liquids.
11. Do not place on or near hot gas or electric burner, or in a heated oven.
12. Do not use appliance for other than intended use.
13. This appliance has a polarized plug (one blade wider than the other). To reduce risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
14. To disconnect, turn appliance off, then remove plug from wall outlet.
15. Make sure machine is turned off before unplugging.
16. A short power-supply cord is provided to reduce risks of becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If using the machine with an extension cord, make sure the cord is the proper electrical rating for the machine.
17. The extension cord should be arranged so that it does not drape over a counter top or tabletop, where it can be pulled on by children or tripped over unintentionally.
18. Before serving make sure food is at safe temperature for baby.
19. Unplug cord from wall outlet before serving milk or food warmed in appliance.
20. Do not leave cord within child’s reach.
21. The food should not be heated for too long a period

This marking indicates that products should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or Contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. CAUTION: To maintain the compliance with the RF exposure guideline, place the unit at least 8in/20cm from nearby persons. CAUTION: If E1, E2, E3, or E4 error messages appear on the bottle warmer screen, please contact customer service before any continued use of the bottle warmer.

Save these instructions

SAFE+SMART BOTTLE WARMER® PARTS

TECHNICAL DATA

Model: BRZ00139 Supply Voltage: 220-240V ~ 50/60Hz Current: 4.4A Heater Power: 500W

TOUCH DISPLAY CONTROLS

LCD Screen Setting Icons: APP INTERFACE Once connected, the setup screen will display on your mobile device. * * English or French can be set at app start up.

FEATURES

• Features 2 Warming Modes: Steady Warm Mode: A warm water bath gently heats milk to body temperature, preserving essential nutrients found in breast milk, which can break down at high temperatures. Quick Warm Mode: Steam is used to safely & efficiently heat formula or milk fast.
• Simple Defrost: Safely defrost frozen breast milk pouches.
• The easy-to-use control panel allows you to set up your warmer whether starting with cold or room temperature milk.
• The Baby Brezza App lets you control the warmer from your smartphone and alerts you when your bottle is ready.
• Works with all bottle types. Remember, bottles made of different materials and construction heat at different rates. Try a higher or lower setting if your bottle is too cold or too warm. Always remove venting systems when warming. Bottles with bottom venting systems may leak when heating.

USING THE SAFE+SMART BOTTLE WARMER® MOBILE APP The bottle warmer can bet set up straight from your smart phone or tablet. Download and install the Baby Brezza Bottle Warmer App available on the app store & Google play. Bluetooth is required on your mobile device to connect to the Safe+Smart Bottle Warmer.

1. Press on the warmer and touch on your mobile device to connect.
2. Place the bottle into the warmer and ensure that the tabs around the bottle tray rim align with the slots in the bottle warmer.Always remove venting systems when warming. Bottles with bottom venting systems may leak when heating.

STEADY WARM

1. Fill the bottle warmer with water until it matches the level of the milk inside the bottle. Always use room temperature water for best heating results. Using warm, hot or cold water will result in inaccurate or dangerous bottle temperatures.
2. Close the bottle warmer cover.
3. Press to turn on machine.
4. Use the setting guide on the back of this manual to determine the setting for your bottle. Make sure to select the correct bottle size and material.
5. Identify the starting temperature of your bottle. • If your bottle is room temperature (approximately 70F/21C) press repeatedly to select your setting. • If your bottle is cold (refrigerated 39°F / 4°C) press repeatedly to select your setting.
6. Press to begin heating.
7. Warmer will beep when bottle is ready. Remove bottle immediately after warming is complete, swirl bottle gently and check temperature before feeding baby .

1. Fill the measuring cup (included on the back of the warmer) with room temperature water. Do not use warm, hot or cold water, which will result in inaccurate or dangerous bottle temperatures. Empty the measuring cup into the warmer as shown. Water level will be at the “Quick Warm” fill line - see arrow below.
2. Close the bottle warmer cover.
3. Press to turn on machine.
4. Use the setting guide on the back of this manual to determine the setting for your bottle. Make sure to select the correct bottle size and material.
5. Identify the starting temperature of your bottle. • If your bottle is room temperature (approximately 70F/21C) press repeatedly to select your setting. • If your bottle is cold (refrigerated 39°F / 4°C) press repeatedly to select your setting.
6. Press to begin heating.
7. Warmer will beep when bottle is ready. Remove bottle immediately after warming is complete, swirl bottle gently and check temperature before feeding baby .

Unplug the bottle warmer and remove the bottle tray from the base.	Carefully pour out any remaining water inside the base.	Wipe all parts dry before next use. If necessary, wipe base exterior with damp cloth. Do not use scouring pads, abrasives or solvents for cleaning.

DE-SCALING THE BOTTLE WARMER It is very important to de-scale this appliance every 4 weeks to ensure that it continues to work properly. Pour all remaining water out of the water chamber. To de-scale, mix 2oz (60ml) of white vinegar with 4oz (120ml) of cold water into the water chamber, and then run one heating cycle on setting 5 until any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.

TROUBLESHOOTING

Customer Service If you are experiencing problems with your BabyBrezza, visit babybrezza.com/pages/international to locate your local customer service representative. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Quick Warm Cold Temperature REFRIGERATED 4˚C

Steady Warm Room Temperature 21˚C

Steady Warm Cold Temperature REFRIGERATED 4˚C

©2021Baby Brezza Enterprises LLC